Walk-In Shower With a Built-In Bench: What It Takes
A real Reisterstown project: 10 days, $14,000 to $15,000

Short answer: a built-in shower bench is framed or formed as part of the shower, waterproofed along with the walls and floor, then tiled and capped with a solid top. On a recent bathroom remodel in Reisterstown, we built a tiled walk-in shower with a bench, two stacked niches and a frameless sliding glass door, plus a new double vanity, in 10 days for about $14,000 to $15,000.
A bench is one of the most requested shower upgrades we see. It gives you a place to sit, shave your legs or rest a foot, and it makes a walk-in shower easier to use as you get older. Here is how one comes together and what to think about before you add one.
Why put a bench in a walk-in shower?
- Comfort. Sitting down for part of a shower is easier on knees, hips and backs.
- Safety. A solid seat you can lower yourself onto is steadier than standing on one foot.
- Storage. The bench top doubles as a shelf for a bottle or a razor.
- Resale. A tiled walk-in shower with a seat reads as a finished, modern bathroom to buyers.
How the bench in this Reisterstown shower was built
The bench runs along one side wall, so it does not get in the way of the shower head or the door. We laid out the shower, bench and niche first, then built the shower base and curb.
Before any tile went on, a red liquid waterproofing membrane went over the shower walls, the niche and the bench. This step matters more on a bench than almost anywhere else, because the top is flat and water sits on it. The bench top needs a slight pitch back toward the shower so it drains instead of holding water.
Then came the tile: large marble-look porcelain on the walls, set with leveling clips to keep the joints flat, and a white hex mosaic on the shower floor and the back of the niches. The bench got a solid white top, which means no grout lines where you sit.
What else this shower included
- Two stacked niches with a hex mosaic back, so bottles stay off the bench and floor
- A rain shower head with a handheld sprayer, which is handy when you are seated
- A frameless sliding glass door on a brushed metal rail, with a towel bar on the outside
- Light tile on the walls and floor to keep a small room bright
Bench size and placement tips
Most comfortable shower benches sit around chair height, roughly 17 to 19 inches off the floor, and at least 15 inches deep. Before you commit, think about:
- Shower size. A bench takes floor space. In a smaller shower, a shallow bench along the back or side wall usually works better than a corner seat that sticks out.
- Where the handheld lands. If you plan to sit, put a handheld sprayer within reach of the bench.
- The door. Make sure the glass door does not swing or slide into the bench.
- Grab bars. If anyone in the house might need one later, add blocking in the wall now while it is open.
What does a walk-in shower with a bench cost?
This Reisterstown project came to about $14,000 to $15,000 and took 10 days, including the tiled shower with the bench and two niches, waterproofing, the frameless glass door and a double vanity. Your number depends on the size of the shower, the tile you pick, the glass and how much else in the bathroom changes. For a full breakdown, see our guide on how much a bathroom remodel costs in Maryland, or read about tub-to-shower conversions if you are replacing a tub.
Thinking about a bench in your shower?
We build tiled walk-in showers across Baltimore County and nearby. See our walk-in shower installation page, our Reisterstown bathroom remodeling page, or request a free estimate and we will come measure and give you a written, itemized price.
Keep reading
More Guides for Maryland Homeowners
Real 2026 costs, permit tips and project stories from our crew. See all articles →
Recent Projects
See Our Work Up Close
Bathroom
New
Double Vanity Bathroom Remodel in Westminster, MD
Bathroom
New
Double Vanity Bathroom Remodel in Reisterstown, MD
Bathroom
Primary Bathroom Remodel in Sykesville, MD
Kitchen
Open-Concept Kitchen Remodel in Towson, MD
Bathroom
Outdated to Oasis: Bathroom Remodel in Bel Air, MD
Service areas
Find Your Town’s Service Page
Based in Reisterstown, we serve communities across Central Maryland. Choose a service, then your town for local costs, permit notes and FAQs.
Bathroom Remodeling in 124 Maryland communities. Pick your town for local pricing and FAQs, or see all bathroom remodeling →
Baltimore County 34 areas
- Arbutus
- Baldwin
- Baltimore City
- Catonsville
- Cockeysville
- Dundalk
- Essex
- Fullerton
- Gwynn Oak
- Halethorpe
- Kingsville
- Lansdowne
- Lutherville
- Middle River
- Milford Mill
- Nottingham
- Overlea
- Owings Mills
- Parkville
- Perry Hall
- Phoenix
- Pikesville
- Randallstown
- Reisterstown
- Riderwood
- Rosedale
- Sparks
- Sparrows Point
- Stevenson
- Timonium
- Towson
- White Marsh
- Windsor Mill
- Woodlawn
Harford County 15 areas
Howard County 18 areas
Anne Arundel County 19 areas
Carroll County 14 areas
Montgomery County 13 areas
Cecil County 4 areas
Kitchen Remodeling in 33 Maryland communities. Pick your town for local pricing and FAQs, or see all kitchen remodeling →
Baltimore County 14 areas
Howard County 4 areas
Carroll County 5 areas
Anne Arundel County 4 areas
Basement Remodeling in 20 Maryland communities. Pick your town for local pricing and FAQs, or see all basement remodeling →
Baltimore County 8 areas
Howard County 2 areas
Carroll County 6 areas
Anne Arundel County 2 areas
Harford County 1 areas
Frederick County 1 areas
Handyman Services in 102 Maryland communities. Pick your town for local pricing and FAQs, or see all handyman services →
Baltimore County 31 areas
- Arbutus
- Carney
- Catonsville
- Chase
- Cockeysville
- Dundalk
- Edgemere
- Essex
- Glyndon
- Gwynn Oak
- Halethorpe
- Hunt Valley
- Kingsville
- Lansdowne
- Middle River
- Nottingham
- Overlea
- Owings Mills
- Parkville
- Perry Hall
- Pikesville
- Randallstown
- Reisterstown
- Rosedale
- Sparks
- Sparrows Point
- Timonium
- Towson
- White Marsh
- Windsor Mill
- Woodlawn










